The Cam Follower is a compact bearing with a high-rigidity
shaft and a built-in needle bearing. Most suitable as a guide roller for cam
mechanisms and linear motion of automated machines and dedicated machines.
What are the type of Cam Follower?
Cam Follower came in different Series of Model.
1.Model CF
1.Model CF:- This model is a low cost cam follower with a
screwdriver slot or a hexagonal socket on the bolt head. The stainless steel
type (symbol M) is suitable for clean-room applications because it does not
generate rust from the outside atmosphere and has less dust.
2.Model CFT:- Like the basically popular types of cam floors,
this model has a threaded hole for the pipe to the bolt head and bolt. Ideal
for places where an integrated piping system is required for lubrication.
3.Model CFH:- This type can be installed in the same mounting
hole as the general-purpose cam follower. Since the mounting axis of the stud
and the head of the stud are eccentric from 0.25 mm to 1.0 mm, the position of
this model can be easily adjusted by turning the bolt. Therefore, it is an
eccentric, compact and high precision cam follower with integral structure.
4.Model CFN:- Based on the popular type of cam follower, this
model is integrated with a push load ball. Axial loads can be accommodated due
to mounting errors.
5.Model CFS:- Since the outer diameter of the outer ring is
very small compared to the diameter of the stud, this cam follower can be
adapted to a very compact design.
6.Model CF-SFU:- To simplify installation, the flat head slot
can be machined into a bolt and secured with a screw. Ideal for devices that do
not have space to secure the bolts.